10AWG Array Output PV-Cable with Multi-Contact MC4 Connectors

This preassembled cable has a male MC4 connector in one end and a female MC4 connector in the opposite end. Use these output cables at home run of a string of modules. They can also be used as an extension when PV panels in the same string are separated by a distance greater  than the panel’s lead cables. These cables are compatible with combiner boxes featuring MC4 type outputs.

These cables are meant to be cut, you can cut them at any point along the wire in order to have the required length of the female and male cables. For example, if you need a 15′ male cable and a 35′ female cable to connect the ends of your strings you need to order a 50′ cable pre string; or if the distance between the combiner box and the inverter is 35′, order a 70′ or 75′ cable.

These cables are preassembled with black #10 AWG PV-Cable sunlight-resistant cable with double jacketed insulation and Multi-Contact MC4 connectors; they are rated for 600 Volt systems. For more information on the Multi-Contact MC4 connectors please visit Staubli International.