Victron Energy Lynx Smart BMS 500 NG Battery Management System – M10 Busbar

The Lynx Smart BMS 500 NG is an advanced Battery Management System (BMS) optimized for Victron’s Lithium NG batteries. It is available in multiple configurations (12.8V, 25.6V, and 51.2V), the Lithium NG batteries can be arranged in series, parallel, or a combination of both, supporting system voltages of 12V, 24V, and 48V. With the capability to connect up to 50 batteries, the system can achieve a storage capacity of up to 192kWh for 12V systems or 384kWh for 24V and 48V setups. For even greater energy storage, multiple Lynx Smart BMS NG units can be paralleled, providing both scalability and redundancy to enhance system reliability.

Victron Energy Lynx Smart BMS NG Battery Management System Key Features

– Optimized for Lithium NG Batteries, making it the most comprehensive BMS in its category. Available in two configurations:: the standard 500A (M10) and the 1000A (M10) for demanding applications.

– Equipped with a built-in 500A or 1000A Contactor (depending on the model) that acts as an additional layer of protection in case primary controls (like ATC, ATD, or DVCC) malfunction. The contractor can serve as a remote-controlled main system switch for enhanced system protection.

– Smart Pre-Charge Circuit that prevents damaging high inrush currents when connecting capacitive loads like inverters, eliminating the need for separate pre-charge devices.

– Advanced Monitoring & Control via Bluetooth connectivity for monitoring via the VictronConnect App, while VE.Can integration supports data access through GX devices like the Cerbo GX and Ekrano GX, and on the VRM portal. Enjoy real-time insights on cell voltages, temperatures, state of charge, current, and historical data ensure comprehensive system visibility.

– Closed-Loop & Programmable Controls making the BMS fully compatible with Victron inverter/chargers, DC-DC converters, and solar charge controllers through DVCC closed-loop control. Additionally it features ATC/ATD contacts for controlling external chargers and loads via remote on/off ports and a built-in programmable relay for alarm signaling or alternator control with Alternator ATC mode.

– Auxiliary Power & Automatic Shutdown through an AUX terminal providing 1.1A auxiliary power at system voltage, perfect for powering GX devices even during system shutdown. It features auto-shutdown feature activates if no charge is detected within 5 minutes of a low-voltage event, protecting system integrity.

– Seamless Data Communication supporting VE.Can and NMEA 2000 protocols, and enabling easy integration into marine or vehicle networks using standard cables. The Lynx Distributor monitoring feature tracks fuse status for up to 4 connected distributors, with alarm notifications for blown fuses.

– Redundant Parallel Operation allowing up to 5 Lynx Smart BMS NG units to be combined, each managing its own battery bank for increased system resilience and scalability.

For detailed specifications and to explore how the Lynx Smart BMS NG can optimize your energy storage solutions, check out the full product documentation on the Victron Lithium NG product page.